Panasonic KC-S1026C Manuel D’Utilisation
Symptom
Possible Cause
Remedy
Double feeding occurs
frequently or the scanner
stops loading while scanning.
frequently or the scanner
stops loading while scanning.
The rollers are dirty.
The paper feed roller, or double feed
prevention roller have become worn
down.
prevention roller have become worn
down.
Right and left sides of the document
to be scanned are not the same in
height, because of curling or folding.
to be scanned are not the same in
height, because of curling or folding.
Flatten the document (page 33) and
load it again after reducing the pages.
load it again after reducing the pages.
The document is printed on an
unsupported type of paper or thick
paper.
unsupported type of paper or thick
paper.
The length of the paper is too short.
Make a copy of the document on
paper of an acceptable size (page 30),
and scan the copy.
paper of an acceptable size (page 30),
and scan the copy.
The document is not aligned
correctly.
correctly.
The document set on the feed tray
has too many pages.
has too many pages.
Remove pages from the document
until it is under the limit mark on the
document guides.
until it is under the limit mark on the
document guides.
Paper jams occur frequently.
The document is wrinkled.
Smooth out the document.
The rollers are dirty.
The document is not aligned
correctly.
correctly.
The document set on the feed tray
has too many pages.
has too many pages.
Remove pages from the document
until it is under the limit mark on the
document guides.
until it is under the limit mark on the
document guides.
Scanned image is skewed.
The document guides are not
adjusted to the size of the document
to be scanned, or the document to be
scanned is set slanted on the feed
tray.
adjusted to the size of the document
to be scanned, or the document to be
scanned is set slanted on the feed
tray.
Right and left sides of the document
to be scanned are not the same in
height, because of curling or folding.
to be scanned are not the same in
height, because of curling or folding.
Flatten the document (page 31) and
load it again after reducing the pages.
load it again after reducing the pages.
The scanned document is
blank.
blank.
The document to be scanned was
loaded upside down.
loaded upside down.
Load the document correctly.
(page 33)
(page 33)
Vertical lines appear on the
scanned document.
scanned document.
The scanning glass is dirty.
The scanning density is
uneven.
uneven.
The scanning glass is dirty.
Operating Manual
57
Appendix