Opticon 25-ULGPMU01-01 Manuel D’Utilisation
Manual No. 25-ULGPMU01-01 Series LGP Handheld CCD Scanner
Part I
General Information
The LGP-6125 Series CCD Scanners utilize state-of-the-art imaging technology similar to that found in digital cameras,
facsimile machines and video camcorders. The scanner images the bar code label, then converts the digital signals into data
the host computer can understand. By capturing the bar code image all at once, the scanner provides fast, highly accurate
reading.
facsimile machines and video camcorders. The scanner images the bar code label, then converts the digital signals into data
the host computer can understand. By capturing the bar code image all at once, the scanner provides fast, highly accurate
reading.
Miniature surface mount electronics make up the CCD scanner's solid state construction. CCD scanners have no moving
mechanical parts and provide years of trouble-free operation.
This manual contains information on setting-up the scanner as well as programming various parameters of the scanner.
mechanical parts and provide years of trouble-free operation.
This manual contains information on setting-up the scanner as well as programming various parameters of the scanner.
The LGP6125 scanner is available in several different interface configurations:
Keyboard Wedge Interface
RS232 Serial Interface
USB Interface
RS232 Serial Interface
USB Interface
There is a specific section of this manual for installing each type of interface. Be sure you are using the section of the
manual that pertains to interface you are using.
Unpacking
Remove the scanner from its packaging and inspect it for damage. If the scanner was damaged in transit, call the dealer or
distributor from whom you purchased it. If you purchased it directly from Opticon, call Opticon Customer Service Dept. at
800-636-0090.
distributor from whom you purchased it. If you purchased it directly from Opticon, call Opticon Customer Service Dept. at
800-636-0090.
Factory Technical Support
If you have any questions or need assistance with programming your scanner call Opticon Technical Support at 800-636-
0090 please have the unit model number and several bar code labels readily at hand. The model number is located near the
connector end of the cable.
0090 please have the unit model number and several bar code labels readily at hand. The model number is located near the
connector end of the cable.
If the scanner must be returned, please contact Opticon to obtain an RMA (Return Merchandise Authorization) number prior
to returning the product. The Customer Service Dept. may be reached at 800-636-0090.
to returning the product. The Customer Service Dept. may be reached at 800-636-0090.
NOTE: Returned merchandise will not be accepted without a RMA number indicated clearly on the outside of the carton.
Page 4