Toshiba 202L Manuel D’Utilisation
68
3.SETTING ITEMS (USER)
3
2. SETTING COPY FUNCTIONS
You can change the initial setting (default setting) of copy job.
1
Press the [USER FUNCTIONS] button on the control panel to enter the
User Functions menu.
User Functions menu.
2
Press the [USER] button, and then press the [COPY] button on the
touch panel.
touch panel.
• The COPY screen is displayed.
3
Specify the following items as you require.
• In the “EXPOSURE MODE” option, press the desired mode button.
• In the “ORIGINAL MODE” option, press the desired mode button.
• In the “IMAGE DIRECTION” option, press the desired mode button.
• In the “ORIGINAL MODE” option, press the desired mode button.
• In the “IMAGE DIRECTION” option, press the desired mode button.
When this is enabled, the portrait originals that are placed in R direction can be detected as portrait original
and perform the duplex copy correctly. This is usually enabled only when you want to perform duplex copy
from the large size of portrait originals such as A3 or LD-size portrait originals.
and perform the duplex copy correctly. This is usually enabled only when you want to perform duplex copy
from the large size of portrait originals such as A3 or LD-size portrait originals.
• In the “BYPASS FEED” option, press the desired media type button.
For more information about the paper type, please see the Operator’s Manual For Basic Functions.
4
Press the [Next] button to display the next screen.