Sony ICF-SC1PC Manuel D’Utilisation

*If  you recall a page or a preset channel when you are in the

Scanning Mode, the receiver goes into the Manual Mode and the

 indication will disappear.

*If a page number or a preset channel number is left flashing for 5

seconds or longer, the number will be entered (without having to
press EXE).

*If you change the frequency by tuning manually  (i.e.  by pressing

+/- ) after you have recalled a station, or if you change the
frequency step or the detection mode of the frequency, the preset
number indication will disappear in the display.

*If you recall an unoccupied channel, “- - -.-  - -” will appear for

the frequency display and the sound will go out.

*If you recall a page with no occupied channels, “- - -.-  - -” will

appear for the frequency display momentarily, and then the
receiver will return to previous status.

Erasing preset memory

To erase a channel preset

1 

Recall the preset channel you want to erase.

2 Press ERASE until the frequency display changes to

" - - - . - - - "

 

The channel preset has been erased and the display
returns to Manual Tuning (without the preset

number).

*You  cannot erase a channel preset in the Scanning Mode.
*You  cannot erase the priority channel preset while receiving a

priority channel with Priority Scanning.

*You  cannot retrieve a preset memory you have erased. Make

sure of the channel you are erasing.

To erase all preset memory at once

1

Press EXE, -, and PRESET simultaneously.
“dEL ALL PRESET” will flash in the display.

Hold the buttons down for 3 seconds or longer.

The flashing will stop and all the preset memory will

be erased.

*You  cannot retrieve preset memory you have erased. Make sure

of the channels you are erasing.

*This operation will also revert the Intelligent Memory contents to

the factory preset.

25