Barco MXRT2400 Manuel D’Utilisation
12
Display Controller
7
Align the Barco display controller(s) for your Barco Display System
with the slot(s) and press it(them) in firmly until the card(s) is(are)
fully seated.
with the slot(s) and press it(them) in firmly until the card(s) is(are)
fully seated.
8
Connect the power cable to the 6-pin power connection on the
graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
Power connection for the MXRT 7300 & MXRT 7400 controllers
9
Screw in or fasten the display controller securely. Replace and
secure the computer cover.
secure the computer cover.
The next step applies only to the MXRT 7300 & MXRT
7400.
7400.
6-pin graphics controller
power cable
power cable