Nikon D5300 Manuel D’Utilisation

192

Choose the flash mode for the built-in flash in P, S, A, and M modes.

Choose the setting (exposure, white balance, or Active D-Lighting) varied when 
bracketing is in effect (

G button

➜ A Custom Settings menu

1 TTL

Flash output is adjusted automatically in response to shooting conditions.

2 Manual

Choose a flash level. At full power, the built-in flash has 
a Guide Number of 13/43 (m/ft., ISO 100, 20 °C/68 °F).

A

A 

Y icon flashes in the viewfinder and 0 flashes in the 

information display when Manual is selected and the flash is raised.

A

When an optional SB-400 or SB-300 flash unit is attached and turned on, Flash cntrl for 
built-in flash changes to Optional flash, allowing the flash control mode for the optional 
flash unit to be selected from TTL and Manual.

A

The following types of flash control are supported when a CPU lens is used in combination 
with the built-in flash (

0 62) or optional flash units (0 232).

• i-TTL Balanced Fill-Flash for Digital SLR: Information from the 2016-pixel RGB sensor is used to 

adjust flash output for a natural balance between the main subject and the background.

• Standard i-TTL Fill-Flash for Digital SLR: Flash output is adjusted for the main subject; the 

brightness of the background is not taken into account.

Standard i-TTL flash control is used with spot metering or when selected with the optional 
flash unit. i-TTL balanced fill-flash for digital SLR is used in all other cases.

G button

➜ A Custom Settings menu