Nikon D5300 Manuel D’Utilisation
70
Remote Control Photography
Using an Optional ML-L3 Remote Control
The optional ML-L3 remote control (
0 237) can be used to reduce camera shake or
for self-portraits. Before proceeding, mount the camera on a tripod or place it on a
stable, level surface.
stable, level surface.
1
Press the
s (E/#) button.
2
Select a remote control mode.
Highlight
" (Delayed remote (ML-L3)) or
# (Quick-response remote (ML-L3)) and
press
press
J.
3
Frame the photograph.
Check focus by pressing the shutter-release
button halfway.
button halfway.
4
Take the photograph.
From a distance of 5 m (16 ft) or less, aim the
transmitter on the ML-L3 at either of the
infrared receivers on the camera (
transmitter on the ML-L3 at either of the
infrared receivers on the camera (
press the ML-L3 shutter-release button. In
delayed remote mode, the self-timer lamp will
light for about two seconds before the
shutter is released. In quick-response remote
mode, the self-timer lamp will flash after the
shutter has been released.
delayed remote mode, the self-timer lamp will
light for about two seconds before the
shutter is released. In quick-response remote
mode, the self-timer lamp will flash after the
shutter has been released.
Note that the timer may not start or a photograph may not be taken if the camera is
unable to focus or in other situations in which the shutter can not be released.
unable to focus or in other situations in which the shutter can not be released.
s (E/#) button