Polycom 1725-22886-001/A Manuel D’Utilisation

Setting Up the Polycom Instructor RP

Connect a guest laptop to the Polycom Instructor RP system.

You can connect a guest laptop to the system

whenever you want to show others content on

the laptop, such as slides for a presentation.
In contrast to the internal computer, the guest

laptop can be attached and removed from the

system at any time. It does not have the SMART

or Polycom Instructor Tools software loaded on

it. You cannot use it to annotate or perform other

SMART Board or video conferencing functions.

To connect a guest laptop to the system:

Connect the video (VGA) cable from the

laptop to the video connector on the

Polycom Instructor RP system.

If you want audio from the laptop, connect

an audio cable from the laptop to the audio

out connector on the Polycom Instructor RP

system.

Connect other optional equipment that you plan to use with the system.

To perform this step, refer to the Polycom Setting

Up the VSX 8000 document or to the

documentation supplied with the equipment you

plan to connect.
You can connect most of the optional equipment

that is shown on the Polycom Setting Up the

VSX 8000 document. Additional monitors,

however, are not supported.

Note

You cannot connect both an integrated
computer and a guest laptop to the
Polycom Instructor RP system at the
same time. If you want to connect an
integrated computer, refer to the previous
step.

Note

If you add a guest laptop to the system at
a later time, you may need to recalibrate
the touch screen. For information on how
to do this, refer to Calibrate the
Annotation Box on page 12.

http://