Panasonic W1014HM0-YI Manuel D’Utilisation
– 16 –
Chapter 2 Description of Parts — Recording module
Rear
1
2
3
4
5
6
8
7
9
10
1 Battery holder
For mounting Anton/Bauer batteries.
2 Battery release lever
Pull this battery release lever down to release the battery.
3 Battery contact terminals
Contact terminals for the battery.
4 Speaker
EE audio can be monitored during recording while playback audio can be monitored during playback.
The alarm is output in sync with flashing/lighting of the warning indicator.
Audio from the speaker automatically is turned off when headphones are connected to the <PHONES> terminal.
The alarm is output in sync with flashing/lighting of the warning indicator.
Audio from the speaker automatically is turned off when headphones are connected to the <PHONES> terminal.
5 <AUDIO IN 1>/<AUDIO IN 2> terminal
Connect the audio equipment or the microphone.
6 <LINE>/<MIC> switch
Switch for switching audio input signals connected to the <AUDIO IN 1>/<AUDIO IN 2> terminal.
<LINE>: Select when audio equipment is connected by the line input.
<MIC>: Select when a microphone is connected.
7 <PHONES> terminal
Connecting terminal of headphones for audio monitor. (Stereo mini jack)
8 <DC OUT/RS> terminal
Terminal for DC 12 V output and REC trigger input. The DC output provides a maximum current of 1.0 A.
9 <DC IN> terminal
Input terminal for connecting an external DC power supply.
10 <LIGHT CONTROL> switch
Control switch when light is connected to the light output terminal.
Top side
2
1
3
1 Mounting hole for control panel mounting part
2 <RELEASE> switch
2 <RELEASE> switch
Switch for removing the control panel.
3 External unit connection terminal
Terminal for future expansions. Keep the cover on during normal use.