Panasonic W1014HM0-YI Manuel D’Utilisation

– 46 –

The Home screen displays the basic camera settings and is used to change those settings.

[FPS]

Sets the frame rate.
[VFR]

Toggles the variable frame rate.

When this is [OFF], the frame rate become 1x the rate set in [MENU] → 

[SYSTEM SETTING] → [FREQUENCY].

 

f

When this is [ON], audio cannot be recorded. Audio is recorded at the sub 

recorder.

[PRESET]

Mode for selecting preset frame rates.

Up to 12 presets can be stored in memory.

Presets can be added/deleted using [ADD]/[DEL].

[FPS]

Mode for selecting from the overall variable range.

The variable step changes through [FINE]/[NORMAL]/[COARSE].

[SHUTTER]

Sets the shutter speed.
[ON]/[OFF]

[OFF] means shutter off (open angle 360 deg).

[PRESET]

Mode for selecting preset shutter speeds.

Up to 12 can be registered.

Presets can be added/deleted using [ADD]/[DEL].

[SYNCHRO]

Mode for selecting from the overall variable range.

The variable step changes through [FINE]/[COARSE].

[deg/sec]

Determines the shutter setting unit.

[deg]: Open angle

[sec]: Second

[EI]

Sets the EXPOSURE INDEX (gain).
[ISO/dB]

Selects the setting method.

[WB]

Sets the color temperature (white balance).
[AWB]

Executes automatic white balancing.

[PRESET]

Mode for selecting preset white balance values.

Up to 12 can be registered.

Presets can be added/deleted using [ADD]/[DEL].

If [AWB] is performed, the results are automatically added to the choices.

[TEMP SHIFT]

Mode for making adjustments from the overall variable range.

[GMg]

Shifts to the Green-Magenta axis.

[COLOR]

Sets the video colors (gamma and gamut).
[MAIN COLOR]

Sets the output colors of videos from terminals <SDI OUT1> to <SDI OUT4> as 

well as videos recorded in the main recorder.

[SUB COLOR]

Sets the colors of videos recorded in the sub recorder.

[Grading SEL]

Sets the grading function.

[MAIN COLOR] is only enabled in [V-Log] mode.

[3D LUT]

Sets the grading in the [3D LUT].

[Grading SEL] is disabled when this is [OFF].

Reads from the SD memory card when [Grading SEL] is set to [ON].

[CDL]

Sets the grading in [CDL].

[Grading SEL] is disabled when this is [OFF].

When [Grading SEL] is set to [ON]

 

f

Sets [Slope]/[Offset]/[Power]/[Saturation] on the control panel.

 

f

Reads from the SD memory card using [File Load].

[MON SET]

Sets the display colors of [MON OUT]/[VF].

[SYSTEM]

Sets the camera’s system.
[FREQUENCY]

Sets the system frequency.

[PIXEL]

Sets the camera’s main resolution (number of pixels).