Panasonic W1014HM0-YI Manuel D’Utilisation
– 55 –
Chapter 6 Audio recording — Preparing for audio input
Using audio devices
a
c
b
a: <AUDIO IN 1> terminal
b: <AUDIO IN 2> terminal
c: <LINE>/<MIC> switch
b: <AUDIO IN 2> terminal
c: <LINE>/<MIC> switch
1
Connect the audio device to the <AUDIO IN 1> or <AUDIO IN 2> terminal of the recording module using the XLR cable.
2
According to the channel to which the XLR cable is connected, select [REAR] in control panel audio input.
3
Switch the <LINE>/<MIC> switch on the <AUDIO IN 1> terminal or <AUDIO IN 2> terminal to <LINE>.
Setting the control panel
1
Press the <HOME> button to display the HOME screen.
2
From [SYSTEM] → [AUDIO] → [VR/IN/OUT], select [IN].
3
Select [REAR] in [CH1/2 IN].
[CH3/4 IN] is automatically set to [FRONT].
@
@
NOTE
t When the input signal is digital audio (AES/EBU format), set [MENU] → [SYSTEM SETTINGS] → [AUDIO INPUT] → [AES/EBU IN] to [ON]. All 4
channels become digital inputs, and audio input setting and level adjustment are disabled.