Panasonic W1014HM0-YI Manuel D’Utilisation

– 77 –

The camera provides time codes, user bits, and date and time (real time) data as time data, and they are recorded in the frame in sync with video. They 
are also recorded as data for clip metadata files.

r

You can switch to [REC RUN] and [FREE RUN] with the control panel.

 

f

[FREE RUN]: The time code always advances even when the power is turned off, and it can be handled in the same way as time. It can also be 

recorded slaved to the time code input to the <TC IN/OUT> terminal.

 

f

[REC RUN]: Can be regenerated and recorded into the time code of clips recorded to P2 cards as a continuous value.

@

@

 t In the following case, the values are not continuous.

-  When deleting recorded clips
-  When switching to 24PN and 30PN (25PN)
-  When recording is interrupted due to a malfunction of [REC WARNING], etc. during recording.

r

Two types of user bits are built in.

 

f

LTC UB: Recorded as LTC and output from the <TC IN/OUT> terminal. It is also output as LTC of the SDI signal.

 

f

VITC UB: Recorded as VITC. It is also output as VITC of the SDI signal.

LTC UB can select and record user set values, time, year/month/day, the same value as time codes, camera frame rate information, and input value of 
external signals from the <TC IN/OUT> terminal, etc.
VITC UB records the camera frame rate information.
The LTC UB value of the recording start time can be recorded on the user bits of the clip metadata.

r

This counter counts from 0 each time recording starts.The duration of the recorded clip is displayed after recording.

r

 

f

Based on the internal clock, year, month, day, and time can be displayed on the viewfinder/LCD monitor and on the image output from the <VF SDI> 
terminal, etc.

 

f

The internal clock is used for measuring the free run time code while the power is off and as time and year/month/day data of the user bits. It is also 
used as the reference for file generation times during clip recording, which determine the sorting order of thumbnails and the order of playback.

 

f

It is also used to generate clip metadata and UMID (Unique Material Identifier).
For details, refer to “Setting the date/time of the internal clock” (page 31).

Sets the user bits to be recorded in the sub code area with the control panel.

Records internal user values. The user value can be set from [MENU] → [REC SETTINGS] → [TC] → [SET UB], the user value 

can be set. Setting values are held even when the power is turned off.

Records the time measured by the internal clock.

Records the hour digit of year/month/day/date-time measured by the internal clock.

Records the user bits values currently entered to the <TC IN/OUT> terminal.

Records the time code value.

Records the camera photo frame rate information.

When playing back clips recorded in native format, the same frame rate information as VITC UB is output regardless of the 

recorded value. Use at this setting when the editing device such as a computer uses the frame rate information of the user bits.

By setting user bits, information such as memos (date, time) up to eight digits long (hexadecimal) can be recorded.

The [TC SET] screen is displayed.

@

@

 t If you exit the user bits setting screen without pressing the jog dial button, the set values will be disabled.