Panasonic W1014HM0-YI Manuel D’Utilisation
– 80 –
Chapter 9 Other Useful Functions — Setting the time data
Connection example for supplying to external device
r
When locking external devices to the camera
<TC IN/OUT> terminal
<SDI OUT1>/<SDI OUT2>/<SDI OUT3>/<SDI OUT4> terminal
VIDEO IN terminal
SDI IN terminal
HD SDI IN terminal
SDI IN terminal
HD SDI IN terminal
TC IN terminal
VTR, etc.
r
When two cameras are connected and one is used as a reference camera
When using two cameras in which one is used as a reference camera to slave the time code, make the connection as follows.
<TC IN/OUT> terminal
Reference camera
Slave camera
<TC IN/OUT> terminal
<SDI OUT1> terminal
<GENLOCK IN> terminal
@
@
NOTE
t Sets the <TC IN/OUT> terminal to output or input in [MENU] → [REC SETTINGS] → [TC] → [TC IN/OUT SEL].
t By setting [MENU] → [REC SETTINGS] → [TC] → [TC OUT REF] to [RECORDING] on both cameras, the two cameras will be able to record with the
t By setting [MENU] → [REC SETTINGS] → [TC] → [TC OUT REF] to [RECORDING] on both cameras, the two cameras will be able to record with the
same time code on the video at the same time.
Operating procedure
1
From [MENU] → [REC SETTINGS] → [TC] → [TC IN/OUT SEL], set [TC OUT].
f
To match the time code output from the <TC IN/OUT> terminal to the SDI output and monitor output image, set [MENU] → [REC SETTINGS] →
[TC] → [TC OUT REF] to [SDI OUT].
[TC] → [TC OUT REF] to [SDI OUT].
f
To output TCR during playback, set [MENU] → [REC SETTINGS] → [TC] → [TC OUT] to [TCG/TCR].
These settings are not required, if the internal device uses LTC or VITC output multiplexed to the SDI output.
These settings are not required, if the internal device uses LTC or VITC output multiplexed to the SDI output.