Panasonic W1014HM0-YI Manuel D’Utilisation

– 89 –

[GENLOCK]

[GENLOCK MODE]

Switches the synchronization signal of the camera signal.

[INT]: Synchronizes to the internal standard signal.

[EXT]: Synchronizes to the entered external standard signal.

 

f

Factory setting: [INT]

[H PHASE COARSE]

Roughly adjusts to match horizontal synchronization phase when building a system.

[−100]…[100]

 

f

Factory setting: [0]

[H PHASE FINE]

Minutely adjusts to match horizontal synchronization phase when building a system.

[−100]…[100]

 

f

Factory setting: [0]

[INFORMATION]

[OPERATION TIME]

Displays the operation time of the camera.

[VERSION]

Displays the information of the camera.

[VERSION]: Displays the version.

[MODEL NAME]: Displays the product name.

[SERIAL NO.]: Displays the serial number.

[UPDATE]

Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD 

memory card.)

[ONLINE SUPPORT]

Switches the camera to the PASS (P2 Asset Support System) function mode.

[TRACE LOG]

Reads the camera’s execution log from an SD memory card.

[SENSOR TEMP]

Displays the ambient temperature detected by the camera module’s sensor.

[FAN]

Sets the fan operation status.

[AUTO]: Controls the number of rotations according to the operation mode of the unit.

[ON]: Always rotates at high speed.

 

f

Factory setting: [ON]

[CARDS/MEDIA]

[CPS PASSWORD]

Sets the CPS encryption password for the expressP2 memory card and the microP2 memory card.

[LOAD]: Loads CPS password from an SD memory card.

[SET]: Enters the CPS password.

[DELETE]: Deletes the password saved to the device, and disables encrypted formats.

[FORMAT CARD]

Formats the card in the specified slot after the format menu is selected.

When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or 

[CPS(ENCRYPT)] (encrypted format).

Data deleted as a result of formatting cannot be restored. Always check the data before formatting.

[MEDIA END ALARM]

Sets whether to generate an alarm sound when there is no remaining free space in the expressP2 memory 

card or the microP2 memory card.

 

f

Factory setting: [ON]

[USER SWITCHS]

[USER1]

Sets the function to be assigned to the USER <1> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME 
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT 
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]

 

f

Factory setting: [INHIBIT]

[USER2]

Sets the function to be assigned to the USER <2> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME 
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT 
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]

 

f

Factory setting: [INHIBIT]

[USER3]

Sets the function to be assigned to the USER <3> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME 
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT 
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]

 

f

Factory setting: [INHIBIT]

[USER4]

Sets the function to be assigned to the USER <4> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME 
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT 
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]

 

f

Factory setting: [INHIBIT]

[USER5]

Sets the function to be assigned to the control panel operation button. The control panel operation button 

functions as a USER button.

Assign [SIX BUTTONS] to USER buttons <1> to <4>.
[INHIBIT], [EXPAND], [ASSIST], [FRAME LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], 
[SMOOTH MODE]

 

f

Factory setting: [INHIBIT]

[USER6]

Sets the function to be assigned to the control panel operation button. The control panel operation button 

functions as a USER button.

Assign [SIX BUTTONS] to USER buttons <1> to <4>.
[INHIBIT], [EXPAND], [ASSIST], [FRAME LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], 
[SMOOTH MODE]

 

f

Factory setting: [INHIBIT]