Panasonic W1014HM0-YI Manuel D’Utilisation
– 96 –
Chapter 10 Menu Operations — Menu list
Item
Description of settings
[USER CLIP NAME]
Sets data to be recorded to [USER CLIP NAME].
(When [RECORD] is [ON])
[TYPE1]: Records setting values of the loaded data.
[TYPE2]: Records the loaded data and counter value.
(When [RECORD] is [OFF])
[TYPE1]: Records the same value as [GLOBAL CLIP ID].
[TYPE2]: Records the same value as [CLIP NAME].
f
Factory setting: [TYPE1]
[PROPERTY]
Checks loaded metadata. This cannot be modified.
[COUNTER RESET]
Resets the counter value when [USER CLIP NAME] is set to [TYPE2].
[VF SDI SETTINGS]
Sets the display content of the output video from the viewfinder and <VF SDI> terminal.
Item
Description of settings
[MARKER]
[SW]
Sets whether to display markers in the output from the <VF> terminal and <VF SDI> terminal.
[ON], [OFF]
f
Factory setting: [ON]
[CENTER MARKER]
Switches the center marker.
[1]: + (large)
[2]: Open center (large)
[3]: + (small)
[4]: Open center (small)
[OFF]: Does not display.
f
Factory setting: [1]
[SAFETY MARKER]
Selects the type of frame for the safety zone marker.
[1]: Box
[2]: Corners
[OFF]: Does not display.
f
Factory setting: [OFF]
[SAFETY AREA]
Sets the size of the safety zone marker.
[80] - [100%] (1% step, fixed aspect ratio)
f
Factory setting: [90%]
[FRAME MARK]
Enables/disables frame marker.
[ON], [OFF]
f
Factory setting: [OFF]
[FRAME SIG]
Sets frame marker aspect ratio.
[1.33:1], [1.44:1], [1.56:1], [1.78:1], [1.85:1], [2.35:1]
f
Factory setting: [2.35:1]
[FRAME LEVEL]
Sets the level of the outside of the frame marker.
[0%] - [100%] (10% step)
f
Factory setting: [100%]
[MARKER & CHAR LVL] Sets the marker and character luminance.
[50%], [60%], [70%]
f
Factory setting: [50%]
[USER BOX]
Sets whether to display/hide the user box display.
[ON], [OFF]
f
Factory setting: [OFF]
[USER BOX WIDTH]
Sets the width of the user box.
[1]…[100]
f
Factory setting: [13]
[USER BOX HEIGHT]
Sets the height of the user box.
[1]…[100]
f
Factory setting: [13]
[USER BOX H POS]
Sets the horizontal position of the center of the user box.
[−50]…[50]
f
Factory setting: [0]
[USER BOX V POS]
Sets the vertical position of the center of the user box.
[−50]…[50]
f
Factory setting: [0]
[ZEBRA]
[ZEBRA MASTER SW]
Sets whether to superimpose the zebra signal on the output from the <VF> terminal and <VF SDI>
terminal.
[ON], [OFF]
f
Factory setting: [OFF]
[ZEBRA2 SW]
Enables/disables zebra pattern 2 and selects [SPOT].
[ON], [SPOT], [OFF]
f
Factory setting: [OFF]
[ZEBRA1 DETECT]
Sets the detection level of zebra pattern 1.
[0%] - [109%]
f
Factory setting: [80%]
[ZEBRA2 DETECT]
Sets the extraction level of zebra pattern 2.
[0%] - [109%]
f
Factory setting: [100%]