Panasonic WJ-GXE500E Mode D’Emploi

32

*10

• Use the SD memory card after formatting it using the [SD memory card] tab.
• Before formatting the SD memory card, it is necessary to select "Use" for "SD memory card" and "Off" for

"FTP periodic image transmission" on the [FTP img. trans.] tab of the "Network" page (☞ page 54).

• It is impossible to access the SD memory card during the process of formatting.
• When an SD memory card is formatted while another user is during operation, the operation will be can-

celed.

• All data saved on the SD memory card will be deleted when the SD memory card is formatted.
• Do not turn off the power of the unit during the process of formatting.
• After formatting the SD memory card, available size may be smaller than the total size since the default

directory is automatically created in the SD memory card.

• Recommended SDHC/SD memory card 

Manufactured by Panasonic (option)  
SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB 
SD memory card: 256 MB, 512 MB, 1 GB, 2 GB 
(miniSD card and micro SD card excluded)

*11

• It may sometimes be impossible to operate when another user is accessing images on the SD memory

card. this case, retry later.

• Depending on the settings of a proxy server or a firewall, images may not be obtained via a network.

*2

• Notification/recording may also not be performed correctly as configured when multiple users are receiv-

ing images.

• When "D1" is selected for "Image capture mode", it is impossible to save images on the SD memory card.

*3

• When the mail notification function or the Panasonic alarm protocol function is used to provide notification

of the remaining space of the SD memory card, select a level to be notified at from the following. 

*4

• Select "FTP error" when using the FTP periodic transmission function and when images are to be trans-

mitted to the FTP server at an alarm occurrence.

• When selecting "Alarm input", select the channel to save the images on the SD memory card.

*5

• The overwrite setting will be as follows according to the "Save trigger" setting. 

FTP error:

Will not be overwritten. 

Alarm input:  Will be overwritten. 
Manual:

Can be determined by selecting "On" or "Off" for "Overwrite".

*6

• Enter the file name used for the image to be saved on the SD memory card. The file name will be as fol-

lows. 
File name:

["Entered file name" + "Time and date (year/month/day/hour/minute/second)"] + "Serial
number" (☞ Page 56)

• When "FTP error" is selected for "Save trigger", images will be saved with the file name entered on the

[FTP img. trans.] tab of the "Network" page. (☞ Page 56)

*7

• When selecting "Alarm input" for "Save trigger", select the image saving interval and the number of imag-

es to be saved. When selecting "Manual", select the image saving interval.

*8

• When selecting "Manual" for "Save trigger", select the image capture size to save the images.
• When "FTP error" is selected for "Save trigger", images will be saved with the image capture size selected

on the [FTP img. trans.] tab of the "Network" page. (☞ Page 56)

• When "Alarm input" is selected for "Save trigger", images will be saved with the image capture size

selected on the [Alarm] tab of the "Alarm" page. (☞ Page 45)

*9

• Total capacity and remaining space of the SD memory card will be displayed.
• Depending on the status of the SD memory card, the size indications will differ as follows. 

--------KB/--------KB: No SD memory card is inserted. Failed to obtain available capacity due to error, etc.

   ********KB/********KB: The SD card memory is unformatted, or locked, etc.