Benq MX722 Manuel D’Utilisation

Operation

20

Adjusting the projected image

Adjusting the projection angle

To adjust the projector:
Screw the adjuster feet to fine-tune the horizontal 

angle. To retract the feet, screw the adjuster feet in a 

reverse direction.

If the projector is not placed on a flat surface or the 

screen and the projector are not perpendicular to 

each other, the projected image becomes trapezoidal. 

To correct this situation, see 

 for details.

Auto-adjusting the image

In some cases, you may need to optimize the picture quality. To do this, press AUTO on 

the projector or remote control. Within 3 seconds, the built-in Intelligent Auto 

Adjustment function will re-adjust the values of Frequency and Clock to provide the best 

picture quality. 

The current source information will be displayed in the corner of the screen for 3 seconds.

This function is only available when PC signal (analog RGB) is selected.

Fine-tuning the image size and clarity

Do not look into the lens while the 

lamp is on. The strong light from the 

lamp may cause damage to your eyes.
Be careful when you press the quick-

release button as it is close to the 

exhaust vent where hot air comes 

from.

1.

Adjust the projected image to the size 
that you need using the zoom ring.

2.

Sharpen the image by rotating the 
focus ring.