Axxess Interface 8690 Manuel D’Utilisation
66
Axxess
®
Model 8690 User Guide – ITP Mode
MOVING ON
To set up remote messaging:
1.
Access your mailbox as described on
.
2.
Press
to select the Personal Options Menu.
3.
Press .
NOTE:
This option is not available if you do not have Remote Messaging enabled.
4.
Press
to set up a primary cascade or press
to set up an alternate cas-
cade.
5.
Do one of the following.
• To program a cascade level: Press
• To program a cascade level: Press
and enter the number of the level
you wish to program (1-9). You then have the following options:
— To set up or change an extension or telephone number: Press
.
Then press
for an extension number or press
for an outside
number. Then enter the number.
— To set up or change a pager number: Press
. Then enter the number.
— To enable or disable the cascade level: Press
. (You cannot enable
the level until a notification number is programmed.)
• To set up the time of day for notification: Press
. Then enter the time
you want the message notification to start and stop. Enter the times with two
digits for the hour and two digits for the minutes (e.g., 0900 = 9:00). If enter-
ing the time in 12-hour format, you are prompted to press
digits for the hour and two digits for the minutes (e.g., 0900 = 9:00). If enter-
ing the time in 12-hour format, you are prompted to press
for AM or
for PM.
NOTE:
For 24-hour notification, program the starting and ending times to be
the same.
• To set up the days of the week for notification: Press
. Then select
one of the following:
— Press
for
Monday-Friday.
— Press
for all days.
— Press
to select individual days. You are prompted to press digits 1-
7 which correspond to the days Sunday through Saturday.
• To select all or priority-only message notification: Press
. Then press
for all messages or
for priority messages only.
6.
Either select another option, as described above, or press
to save the settings
and exit.
4
5
1
2
1
2
1
2
3
1
2
1
2
3
1
2
3
4
1
2
#