Samsung RFG296HDRS Manuel D’Utilisation

 

operating

CHANGING THE WATER FILTER

To reduce risk of water damage to your 
property DO NOT use generic brands of 
water filters in your SAMSUNG Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTER. 
SAMSUNG will not be legally responsible for any 
damage, including, but not limited to property damage 
caused by water leakage from use of a generic water 
filter. SAMSUNG Refrigerators are designed to work 
ONLY WITH SAMSUNG Water Filter.
The Filter light turns red to let you know when 
it is time to change your water filter cartridge.
To give you time to get a new filter, the red 
light comes on just before the capacity of the 
current filter runs out. Changing the filter on 
time provides you with the freshest, cleanest 
water from your refrigerator.
1.   Shut off the water supply. Then, turn the water filter   

( 

1 ) about 1/4 turn, counter-clockwise.

2.  Pull the water filter ( 1 ) from the case filter ( 2 ).

•  To change the water filter more easily, shut off 

the water supply valve.

     •  Sometimes, it is hard to disassemble the water 

filter because impurities in the water cause it to 
stick. If you are having difficulties, grip the water 
filter firmly and pull it hard.

     •  When you pull the water 

filter, a little water can 
leak from the opening. 
This is normal. To 
minimize the water 
leaks, keep the filter 
cartridge horizontal when you pull it.

     •  To prevent overflow, empty the water filter tray       

( 

3 ) and dry around the filter case ( 2 ).

3. Insert the new filter into the filter case ( 4 ).

4.   Push the filter, and then turn it clockwise until it 

locks.

•  If you have trouble inserting the water filter 

because of high water pressure, shut off the 
water supply valve.

Cooling Off mode (also called Shop mode),
is designed for use by retailers when they
are displaying refrigerators on the shop
floor. In Cooling Off mode, the refrigerator's
fan motor and lights work normally, but the
compressors do not run, and the refrigerator
and freezer do not get cold.
To start Cooling Off mode, touch and hold
the Energy Saver button and the Power
Freeze button for 5 seconds during normal
operation. The refrigerator chime sounds and
the temperature display flashes OF OF.
To cancel Cooling Off mode, touch and hold
the Energy Saver and the Power Freeze
buttons again for 5 seconds.

If you don’t want to make more ice, touch 
the Ice Off button. 
The icon will light up and the Ice-Maker 
stops making ice.

We recommend you stop ice making 
if the following occur:
-  There is enough ice in the ice 

bucket.

- You want to save water and energy.
-  Water is not being supplied to the 

refrigerator.

If the ice maker function is ON, and 
the water Line is not connected, there 
will be a water valve noise from the 
back of the unit, press the Ice Off 
(Hold 3sec for child lock) button for 
less than 3 seconds until the Ice Off 
Indicator (

) illuminates.

If you do not press any 

button(letters not ICON), the 

display turns off in a few seconds.
If you press any 

button(letters not ICON), the 

display lights up again.  

This icon will light up when you need to 
change the filter. After you use about 300 
gallons of water, the filter indicator lights 
up. (about 6 months). After you install the 
new water filter, reset the filter indicator 
by touching the Alarm/hold 3 sec for Filter 
Reset button. 

•  If water is not dispensing or 

dispensing slowly, you need to 
replace the water filter because the 
water filter is clogged.

•  Some areas have large amounts of 

lime in their water, which causes the 
water filter to clog more quickly.

2

1

(Red)

WARNING

3

2

DA68-02488A-11.indb   12

14. 5. 14.   �� 11:45