Beko GNE 60520 DX Manuel D’Utilisation

Page de 35
EN
9
Placing and Installation
A Caution: Never plug the refrigerator 
into the wall outlet during installation. 
Otherwise, risk of death or serious 
injury may arise.
A If the entrance door of the room 
where the refrigerator will be installed is 
not wide enough for the refrigerator to 
pass through, than call the authorized 
service to have them remove the 
doors of your refrigerator and pass it 
sideways through the door. 
1. Install your refrigerator to a place 
that allows ease of use.
2. Keep your refrigerator away from 
heat sources, humid places and direct 
sunlight.
3. There must be appropriate air 
ventilation around your refrigerator in 
order to achieve an efficient operation.
If the refrigerator is to be placed in a 
recess in the wall, there must be at 
least 5 cm distance with the ceiling 
and at least 5 cm with the wall.
If the floor is covered with a carpet, 
your product must be elevated 2.5 cm 
from the floor.
4. Place your refrigerator on an even 
floor surface to prevent jolts.
5. Do not keep your refrigerator in 
ambient temperatures under 10°C.
Floor balance adjustment
A If your refrigerator is unbalanced;
1- Ventilation cover is removed by 
unscrewing its screws as illustrated 
in the figure before the procedure. 
You can balance your refrigerator by 
turning the front foots of it as illustrated 
in the figure. The corner where the 
leg exists is lowered when you turn 
in the direction of black arrow and 
raised when you turn in the opposite 
direction. Taking help from someone to 
slightly lift the refrigerator will facilitate 
this process.
2. After the balance issue is remedied, 
install back the ventilation cover and 
fasten the screws. 
D
A
B
C
3. Remove the screws fastening the 
lower ventilation cover using a Philips 
screwdriver.