HP (Hewlett-Packard) A3311A Manuel D’Utilisation
Installation & Configuration
Powering-On the Storage System
26
Installation
Powering-Off the Storage System
WARNING! When the power switch is in the standby position, the dc power output
circuits within the power modules are off, but the ac power input circuits are still active.
circuits within the power modules are off, but the ac power input circuits are still active.
To power-off the storage system:
1. Lift the power switch cover.
2. A3312A/12AZ Only: Press the cabinet power switch to the power-off “0” position (see Figure 58).
3. Press the storage system power switch then release the switch to the out (standby) position