Leica 6007285 Manuel D’Utilisation
7
Set-up and applications
Roteo 20HV/25H/35/35G - 1.2.0en
D
EN
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
H
RUS
CZ
Two modes are available:
• Full manual mode – Both the X and Y-axes will be in
• Full manual mode – Both the X and Y-axes will be in
manual mode
• Semi-automatic mode – The X-axis self-levels, The Y-
axis is in manual mode.
For slopes up to 10%, set up the laser in horizontal mode
and use the remote to set the slope following the instruc-
tions below.
For slopes greater than 10%, set up the laser in vertical
mode and use the inclined plane feature explained in the
following section.
and use the remote to set the slope following the instruc-
tions below.
For slopes greater than 10%, set up the laser in vertical
mode and use the inclined plane feature explained in the
following section.
Set-up for full manual mode
In full manual mode, the unit will not self-level and the
head will continue to rotate. The plane of laser light can
be tilted in either one or both planes.
head will continue to rotate. The plane of laser light can
be tilted in either one or both planes.
To use the laser in full manual mode:
X
After turning the laser on and allowing it to self-level,
press the Auto/Manual key {B-1}. The X-axis LED
{B-10} above the key will blink red rapidly, indicating
that you are in manual mode and you can set slope in
the X-axis. (The Y-axis LED will also be on and red.)
press the Auto/Manual key {B-1}. The X-axis LED
{B-10} above the key will blink red rapidly, indicating
that you are in manual mode and you can set slope in
the X-axis. (The Y-axis LED will also be on and red.)
X
Turn the laser so that the X on the top of the laser
faces the direction of the slope.
faces the direction of the slope.
X
Press either CCW/CW (manual slope) keys {B-6 or
B-7} to adjust the slope of the X-axis.
B-7} to adjust the slope of the X-axis.
X
To adjust the slope of the Y-axis, press the Auto/
Manual key {B-1} again. The Y-axis LED {B-10}
above the key will blink red rapidly, indicating that you
are in manual mode and you can set slope in the Y-
axis. (The X-axis LED will also be on and red.)
Manual key {B-1} again. The Y-axis LED {B-10}
above the key will blink red rapidly, indicating that you
are in manual mode and you can set slope in the Y-
axis. (The X-axis LED will also be on and red.)
X
Turn the laser so that the Y on the top of the laser
faces the direction of the slope.
faces the direction of the slope.
X
Press either CCW/CW (manual slope) keys {B-6 or
B-7} to adjust the slope of the Y-axis.
B-7} to adjust the slope of the Y-axis.
X
Press the Auto/Manual key {B-1} for 1.5 seconds
to
exit manual mode and return to automatic mode. See
illustration {J} in the back, inside cover of this manual.
illustration {J} in the back, inside cover of this manual.
Set-up for semi-automatic mode
In semi-automatic mode, the unit will self-level in the X-
axis. The plane of laser light can be tilted manually in the
Y-axis.
axis. The plane of laser light can be tilted manually in the
Y-axis.
To use the laser in semi-automatic mode:
X
After turning the laser on and allow the laser to self-
level, press and hold the Auto/Manual key {Roteo 35/
35G: B-1, Roteo 20HV/25H: E-3} for three seconds.
Roteo 20HV/25H: The X-axis LED {B-10} above the
key will blink green slowly while leveling. The Y-axis
LED will blink quickly indicating that the Y-axis is in
manual mode and you can set slope in the Y-axis.
level, press and hold the Auto/Manual key {Roteo 35/
35G: B-1, Roteo 20HV/25H: E-3} for three seconds.
Roteo 20HV/25H: The X-axis LED {B-10} above the
key will blink green slowly while leveling. The Y-axis
LED will blink quickly indicating that the Y-axis is in
manual mode and you can set slope in the Y-axis.
X
Turn the laser so that the Y on the top of the laser
faces the direction of the slope.
faces the direction of the slope.
X
Press either CCW/CW (manual slope) keys {B-6 or
B-7} to adjust the slope of the Y-axis.
B-7} to adjust the slope of the Y-axis.
X
Press the Auto/Manual key {B-1} again to exit semi-
automatic mode and return to automatic mode.
automatic mode and return to automatic mode.
Set-up for inclined planes
(Roteo 20HV/35/
35G)
The Roteo can also be tilted, for manual slope, at various
angles on the wall mount. A tripod with rotating mounting
plate will speed set-up.
angles on the wall mount. A tripod with rotating mounting
plate will speed set-up.