Leica DISTO D810 Manuel D’Utilisation
Leica DISTO
TM
D810 touch 799093a
38
EN
Message Codes
If the message Error does not disappear
after switching on the device repeatedly,
contact the dealer.
If the message InFo appears with a number,
press the Clear button and observe the
following instructions:
after switching on the device repeatedly,
contact the dealer.
If the message InFo appears with a number,
press the Clear button and observe the
following instructions:
Care
•
Clean the device with a damp, soft cloth.
•
Never immerse the device in water.
•
Never use aggressive cleaning agents or
solvents.
solvents.
Warranty
Lifetime Manufacturer's Warranty
Warranty coverage for the entire usage time
of the product according to Leica Geosys-
tems International Limited Warranty. Free of
charge repair or replacement for all products
that suffer defects as a result of faults in mate-
rials or manufacturing, for the entire life of
the product.
3 Years No Cost
Guaranteed service should the product
become defective and require servicing
under normal conditions of use, as described
in the user manual, at no additional charge.
Warranty coverage for the entire usage time
of the product according to Leica Geosys-
tems International Limited Warranty. Free of
charge repair or replacement for all products
that suffer defects as a result of faults in mate-
rials or manufacturing, for the entire life of
the product.
3 Years No Cost
Guaranteed service should the product
become defective and require servicing
under normal conditions of use, as described
in the user manual, at no additional charge.
To receive the "3 years no cost" period, the
product must be registered at www.leica-
geosystems.com/registration within 8 weeks
of the purchase date. If the product is not
registered, a "2 years no cost" period applies.
product must be registered at www.leica-
geosystems.com/registration within 8 weeks
of the purchase date. If the product is not
registered, a "2 years no cost" period applies.
Functions
Distance measuring
yes
Min/Max measuring
yes
Permanent measuring
yes
Stake-out
yes
Addition/Subtraction
yes
Area
yes
Triangle area
yes
Volume
yes
Trapezium
yes
Painter function (area with partial
measurem.)
measurem.)
yes
Pythagoras
2-point, 3-point
Smart Horizontal Mode /
Indirect height
Indirect height
yes
Height-profile measurement
yes
Level
yes
Sloped objects
yes
Height tracking
yes
Memory
yes
Beep
yes
Illuminated colour display
yes
Multifunctional endpiece
yes
Pointfinder (Viewscreen)
4x zoom, OV
Bluetooth
®
Smart
yes
Personalized Favorites
yes
Timer
yes
Long Range Mode
yes
Calculator
yes
Photo/Screenshot
yes
Compass
yes
Gallery with USB download
yes
Diameter
yes
Width
yes
Area from Photo
yes
No.
Cause
Correction
156
Transverse tilt greater
than 10°
than 10°
Hold the instrument
without any transverse tilt.
without any transverse tilt.
162
Calibration mistake
Make sure, the device is
placed on a absolutely
horizontal and flat surface.
Repeat the calibration
procedure. If the mistake
still occurs, contact your
dealer.
placed on a absolutely
horizontal and flat surface.
Repeat the calibration
procedure. If the mistake
still occurs, contact your
dealer.
204
Calculation error
Perform measurement
again.
again.
240
Data transfer error
Repeat procedure.
252
Temperature too high Let device cool down.
253
Temperature too low Warm device up.
255
Received signal too
weak, measuring time
too long
weak, measuring time
too long
Change target surface
(e.g. white paper).
(e.g. white paper).
256
Received signal too
high
high
Change target surface
(e.g. white paper).
(e.g. white paper).
257
Too much back-
ground light
ground light
Shadow target area.
258
Measurement outside
of measuring range
of measuring range
Correct range.
260
Laser beam inter-
rupted
rupted
Repeat measurement.