Multiquip SHS81A Manuel D’Utilisation

Remove the 2 hex nuts 

L

and hex screw and washer 

M

 to

gain access to the V-belt on the clutch side. Remove V-belt

cover 

.

Using the provided wrench, loosen the three nuts 

M

 to reduce

the tension on the V-belt, then turn the V-belt Tensioning Cam

L

 until the V-belt is completely slacked.

Remove the V-belt 

from the 

clutch and spindle pulleys.

Install the new V-belt around both pulleys. It is essential that the
drive V-belt is properly positioned around both the clutch and
spindle pulleys.

Remove the 2 hex nuts 

J

 and hex screw and  guard adjustment

knob  

I

  to gain access to the V-belt on the spindle side.  Remove

the  Cover Guard  

K

.