Makita HR2450T Manuel D’Utilisation

P 22 / 22 

Fix field lead wire (black)
with lead holder as per
the illustration. 

Fix field lead wire (black)
with lead holder as per
the illustration. 

Fix noise suppressor's  
lead wire (clear) with   
lead holder as per the   
illustration. 

Fix brush holder's
lead wire (red) and 
field lead wire (white)
with lead holder as per
the illustration.
* Do not slack brush holder's lead 
   wire (red) between brush holder and
   lead holder.
* Put the brush holder lead wire (red)
   under the field lead wire (white).

Fix brush holder's
lead wire (blue) and 
field lead wire (black)
with lead holder as per
the illustration.
* Pass brush holder's lead wire (blue)
   under the field lead wire (black).
* Do not slack brush holder's lead 
   wire (blue) between brush holder and
   lead holder.

Fix field brush holder's
lead wire (blue) and 
field lead wire (black)
with lead holder as per
the illustration.

Fix lead wires which are passed
through this area, with any of 
these lead holders.

Noise suppressor

Noise suppressor is not
used in some countries

Fix the following lead wires with this 
lead holder.
 * Brush holder's lead wire (red)
 * 2 field's lead wires (black)
 * Noise suppressor's lead wire (clear)