Hitachi DH40MB Manuel D’Utilisation

13

(1) Switching to “hammering”

(a) Pull the selector lever, release lock

and turn it counterclockwise.

(b) Align ▲ of the selector lever with ▲

on the 

 side of the undercover as

illustrated in Fig. 7.

(c) Push in the selector lever to lock it.

NOTE:
Turn the selector lever (do not pull it up)
to check if it is completely locked and
make sure that it does not turn.

(2) When fixing working positions of tools

such as cold chisel, etc.,
(a) Pull the selector lever, release lock

and turn it. Align ▲ of the selector
lever and 

 of the undercover as

illustrated in Fig. 8.

(b) Push in the selector lever to lock it.
(c) Turn the grip as illustrated in Fig. 9

and fix the working position of the
tool.

(d) Switch the selector lever to

“hammring” according to the
procedures mentioned in the above
item (1) and secure the position of
the tool.

5. Install the stopper (Fig. 10)

(1) Loosen the side handle and insert the

straight portion of the stopper into the
handle bolt hole from the front cover.

(2) Loosen the side handle, move the

stopper to the specified position and
rotate the grip of the side handle
clockwise to fix the stopper.

Fig. 7

Undercover

▲

▲

Selector
Lever

Fig. 8

▲

䡬

䡩

Selector
Lever

Undercover

Grip

Fig. 9

Stopper

Side Handle

Fig. 10