Wagner SprayTech 558054 Manuel D’Utilisation

ProSpray 3.39 

9

 

Starting operation

  1.  Screw the high-pressure hose (2) to the coating material 

outlet (Fig. 4, Item 1).

  2.  Screw the spray gun (3) with the selected tip onto the high-

pressure hose.

  3.  Tighten the union nuts at the high-pressure hoses firmly so 

that coating material does not leak.

  4.  Remove the oil cup cap with a straight-slot screwdriver.
  5.  Fill the oil cup with EasyGlide (Fig. 5) until the oil gauge (4) is 

showing that it is full.

  6.  Replace oil cup cap.
  7.  Press oil button 2-5 times to prime the oiler.  Press once for 

every eight hours of usage to lubricate the fluid section.

The following is a description of the control panel indicators.

Pressure

Indicator

Service

Indicator

The pressure indicator shows the current operating pressure of the 

sprayer. It has three different indications: blinking yellow, solid

yellow, and solid green.

Blinking yellow
When the pressure indicator is blinking yellow, the sprayer is 

operating between 0 and 1.4 MPa (14 bar).  A blinking yellow 

pressure indicator means:

•  The sprayer is plugged in and turned “ON”

•  The sprayer is at priming pressure (little or no pressure)

•  It is safe to move the relief valve between positions

•  It is safe to change or replace the spray tip

Solid yellow
When the pressure indicator is solid yellow, the sprayer is operating 

between 1.4 MPa (14 bar) and 12 MPa (120 bar).  A solid yellow 

pressure indicator means:

•  The sprayer is at the proper pressure setting for spraying stain,

lacquer, varnish, and multi-colors