Wagner SprayTech 3.23 Manuel D’Utilisation

 

16 

ProSpray 3.23

Repairs at the unit 
 17.  Carefully tighten retainer nut (5) with adjusting wrench

 18.  Slide the top of the piston (3) into the T-slot (9) on the

slider assembly (4).

 19.  Position the pump manifold (2) underneath the gear unit

housing and push up until it rests against the gear unit 

housing. 

 20.  Attach pump manifold (2) to the gear unit housing.

 21.  Screw pump manifold (2) tightly to gear unit housing.

 22.  Lubricate O-ring (Fig. 11, Item 6) between pump manifold

(2) and inlet valve housing with machine grease. Screw

inlet valve housing to the pump manifold.

  23.  Insert the elbow on the siphon assembly into the bottom 

of the pusher stem housing.  Push the retaining clip up 

into the groove inside the foot valve housing to secure the 

siphon assembly in position.  Place the return tube over 

the return tube fitting and secure with the clip.

  24.  Install front cover.

LOAD

LINE

Switch

White

Blac

k

Black

White

White

Red

Black

Black

Red

Red (+)

Black (-)

Black

Power Cord

Ground

Capacitor

Surge suppressor

Motor controller

Pressure sensor

L.E.D.

Hall sensor

Fuse block

Fuse

Potentiometer

Motor

EMI Filter

Uncontrolled Copy