Wagner SprayTech 530226 Manuel D’Utilisation

 

3

Your Smart Roller can be used with two types 

of container lids that are used to allow you to 

pull material from the material container into the 

Smart Roller.  

 

The lid below is desiged for use with standard, 

one-gallon, round material containers.  This lid 

comes standard with your Smart Roller.  

Use the lid shown below if you are using 

something other than a standard, one-gallon, 

round material container.  *not included with 

 

 1.  Apply a thin layer of petroleum 

jelly to the fill tube.  This will help 

the fill valve slide easily off the fill 

tube.

 1.  Slide the small end of the fill tube 

(a) through the hole in the container 

lid you plan to use.

 2.  Press down and firmly hold the fill 

valve onto the fill tube.

 3.  Pull the plunger to draw the 

material into the main tube.  When 

the tube is full, you are ready to 

begin using the Smart Roller.  

2a.  Standard containers - Attach the 

container lid with fill tube securely 

to the material container.

2b.  all other containers - Thread the 

container lid with fill tube onto the 

material container.