Hitachi NT 50AE2(S) Manuel D’Utilisation
English
22
4 Connect the air hose.
ALWAYS WEAR SAFETY GLASSES.
Perform a nailing test.
Perform a nailing test.
5 DISCONNECT AIR HOSE FROM NAILER.
6 Choose a suitable position for the adjuster.
6 Choose a suitable position for the adjuster.
NOTE:
●
●
The nail might not drive deep enough if using
high pressure with the adjuster set upwards
(shallow side) due to factors such as the
material hardness or nail type.
If that happens, reduce pressure and set the
adjuster to lowest position so the nail drives
in at a good position.
high pressure with the adjuster set upwards
(shallow side) due to factors such as the
material hardness or nail type.
If that happens, reduce pressure and set the
adjuster to lowest position so the nail drives
in at a good position.
CHANGING THE EXHAUST DIRECTION
WARNING
● When changing the exhaust direction, be sure to remove your
finger from the trigger and disconnect the air hose from the nailer.
The direction of the exhaust vent can be changed by turning the top cover.
USING THE NOSE CAP
WARNING
● When detaching or attaching the nose cap, be sure to remove
your finger from the trigger and disconnect the air hose from the
nailer.
nailer.
Exhaust vent
Top cover
Too deep
Too shallow
Turn adjuster
Turn adjuster
Flush
Flush
2
2
01Eng_NT50AE2_US
11/19/10, 15:26
22