Husqvarna PG530 Manuel D’Utilisation

Page de 26
English -
 5
Never use the machine if you are tired, if you have 
drunk alcohol, or if you are taking medication that 
could affect your vision, your judgement or your co-
ordination.
Never use a machine that has been modifi ed in any 
way from its original specifi cation.
Be on your guard for electrical shocks. Avoid having 
body contact with lightning-conductors/metal in the 
ground.
Never drag the machine by means of the cord and 
never pull out the plug by pulling the cord. Keep all 
cords and extension cords away from water, oil and 
sharp edges.
Make sure the cord is not pinched in doors, fences 
or the like. 
Check that the cord and extension cord are intact 
and in good condition. Never use the machine if the 
cord is damaged, hand it in to an authorized service 
workshop for repair.
Do not use a rolled up extension cord
The machine should be connected to an earthed 
outlet socket.
Check that the mains voltage corresponds with that 
stated on the rating plate on the machine.
Ensure the cord is behind you when you start to 
use the machine so that the cord will not be dam-
aged.
At no time should lifting of machinery be attempt-
ed without mechanical means such as a hoist or 
fork lift.
WARNING!
Overexposure to vibration can lead to circula-
tory damage or nerve damage in people who 
have impaired circulation. Contact your doc-
tor if you experience symptoms of overexpo-
sure to vibration. These symptoms include 
numbness, loss of feeling, tingling, pricking, 
pain, loss of strength, changes in skin colour 
or condition. These symptoms normally ap-
pear in the fi ngers, hands or wrists.
Safety Instructions
WARNING
Under no circumstances may the machine be 
started without observing the safety instruc-
tions. Should the user fail to comply with 
these, Husqvarna Construction Products 
Sweden AB or its representatives are free 
from all liability both directly and indirectly. 
Read through these operating instructions 
and make sure that you understand the 
contents before starting to use the machine. 
Should you, after reading these safety in-
structions, still feel uncertain about the safety 
risks involved you must not use the machine, 
please contact your dealer for more informa-
tion.
Please read the operator’s manual carefully.
Only qualifi ed staff should be allowed to operate 
machinery.
Never use a machine that is faulty. Carry out the 
checks, maintenance and service instructions 
described in this manual. All repairs not covered in 
this manual must be performed by a repairer nomi-
nated by either the manufacturer or distributor. 
Always wear personal safety equipment such as 
sturdy non-slip boots, ear protection, dust mask and 
approved eye protection. 
The machine should not be used in areas where 
potential for fi re or explosions exist. 
Machinery should only be started when grinding 
heads are resting on the ground unless carrying out 
a testing procedure as outlined in this manual.
The machine should not be started without the 
rubber dust skirt attached. It is essential a good 
seal between machine and fl oor be established for 
safety, especially when operating in dry grinding 
applications.
When changing the grinding discs ensure power 
supply to the unit is OFF by engaging the Emergen-
cy Stop button and the power-plug disconnected.
The machine should not be lifted by handles, mo-
tor, chassis or other parts. Transportation of the 
machine is best done on a pallet/skid to which the 
machine must be fi rmly secured.
Extreme caution must be used when moving 
machinery by hand on an inclined plane. Even the 
slightest slope can cause forces/momentum making 
the machinery impossible to brake manually.
Safety Instructions