Troy-Bilt 52067 - 5HP Manuel D’Utilisation

This Section describes the location and
function of the features and controls on
your machine.  Refer to the “Operation”
Section for detailed operating 
instructions.

IMPORTANT: Refer to the separate en-
gine manual for detailed information
about the controls on the engine.

Pull the control bail (A, Figure 3-1) up
against the handlebar (engage bail) to
start rotation of the trimmer head.  Let go
of the control bail (disengage bail) to stop
the trimmer head. 

The trimmer head (B, Figure 3-1) is ad-
justable to an infinite number of height
settings from 1-1/2"-to-4-1/2".

The two trimming lines are secured to line
holders (C, Figure 3-1).  Replacing the
trimmer lines is easy (refer to “Changing
Trimmer Lines” in Section 5).

The handlebar (D, Figure 3-1) has two
height settings (see “Adjust Handlebar
Height” in Section 4).

A heavy-duty plastic shield (E, Figures 3-
1 and 3-1A) protects the engine from all
manner of debris.  The shield tilts for-
ward for access to the engine.

Use this lever (F, Figure 3-1) to regulate
engine speed and to stop the engine.  The
throttle settings are shown on the decal
next to the lever.

The recoil starter is located at the rear of
the engine (G, Figure 3-1) and is used to
pull start the engine.

The fuel primer button (H, Figure 3-1) al-
lows a cold engine to be primed for
faster, easier starting.  

Various symbols (shown here, with
word descriptions) are used on the
unit.