Tascam D00871320A Manuel D’Utilisation

- STOP key:

Stops the CD player.

- PLAY key:

Plays back the selected track.

- F FWD key:

Selects the next track.

- REW key:

Selects the previous track.

- DATA dial:

Selects a track to playback from the track list.

- ENTER key:

Plays the selected track.

- STOP+REW key: Stops playback and locates at the start of the CD.

(Press the REW key with the STOP key held down.)

On the DP-01FX/CD, a song's master stereo track can be written to
a CD-R or CD-RW (see “Mastering” on page 27), and this master
recording can be burned to CD for audio CD playback.

There are two ways of making a CD:

Disk At Once (simply called "DAO" from here on)

Track At Once (simply called "TAO" from here on)

In the 

, master stereo tracks recorded on the DP01FX/CD 

are written all at once.

DAO finalized the disc when it's finished (see “Finalizing CDs” on 
page 75), making the CD compatible with other CD players immediately 
after writing by DAO has ended.

With DAO, additional tracks cannot be written to the CD because it creates 
a finalized disc.

In the 

, master stereo tracks recorded on the DP01FX/CD 

are written to the CD on a trackbytrack basis.

If you want to write tracks to a CD over several sessions, choose the TAO recording.

Since TAO does not finalize the CD, this CD cannot be played back on a 
regular CD player (it can be played on the DP01FX/CD).

After all of the desired master stereo tracks have been written by TAO, 
finalize the disc (“Finalizing CDs” on page 75).

Additional tracks cannot be written to the CD after finalization has ended.

With Disk At Once, the track order can be set when writing two or
more tracks.

A silent gap of any desired length can also be added between tracks.

DP-01_OM_E.book  72 ページ  ２００５年６月１３日　月曜日　午後７時１４分