Panasonic TH-58AX800Z Manuel D’Utilisation

English

● 

 For the information of the camera operation, refer 
to [eHELP] (Functions > Built-in Camera).

● 

 Adjusts the angle of lens.

● 

 Do not place any objects between the TV remote 
control signal receiver and remote control.

● 

 Senses brightness to adjust picture quality when 
[Ambient Sensor] in the Picture Menu is set to 
[On].

 Red: Standby
 Green: On
 Orange:  Standby with Recording / Standby with 

Timer Programming On / Standby with 
Info Bar On

● 

 The LED blinks when the TV receives a command 
from the remote control.

● 

 For the information of the sensor operation, refer to 
[eHELP] (Functions > Info Bar).

● 

 Press repeatedly until you reach the desired mode.

● 

 Press and hold for about 3 seconds to display main 
menu.

 OK (when in the menu system)

 9  Channel Up / Down

 Cursor Up / Down (when in the menu system)

 10 Volume Up / Down

 Cursor Left / Right (when in the menu system)

● 

 Use to switch the mains power.

 

 Slide open

 

 

 Note the correct 
polarity (+ or -)

 Close

● 

 It is recommended to hold Touch Pad Controller with 
your hand when using.

● 

 The battery power will be used whenever you use 
Touch Pad Controller (including the touch of the touch 
pad) even if not operating the TV. It may decrease the 
battery life.

● 

 Some operations differ depending on the application.

● 

 When pressing 8, 9, 10 buttons, the control panel 
guide appears on the right side of the screen for 3 
seconds to highlight the pressed button.

 

 Rear side of the TV

 24 mm

● 

 Automatically comes out and back in by the 
operation of a camera application.

● 

 Do not pull or push the camera by hands.