Heath Zenith UT-9250-WH Manuel D’Utilisation

-6-

CAUTION:  If  you  have  not  already  turned  the
power off at the breaker or fuse, do so now.
Connect the junction box wires to the fixture wires.
Twist together and secure with wire connectors.
CAUTION: If you are not controlling additional
fixtures from your security light fixture, DO NOT
connect the RED wire or remove wire connector.

Black to 

White to 

Mounting 

Bracket

wire to junc-

RED, not 

used in most 

applications

Gasket

❒

 Turn power off at the fuse or circuit breaker.

❒

 Remove  the  existing  light  fixture  (if  appli-

cable).

❒

 Install the mounting bracket as shown using

two screws supplied in hardware pack that fit
your junction box:

Rectangular Junction Box - Use two #6-32
x 3/4" screws.

Circular or Octagonal Junction Box - Use
two #8-32 x 3/8" screws.

Watertight Junction Box - Use two #10-24
x 1/2" screws.

❒

 The plastic hanger can be used to hold the fix-

ture while wiring. The small end of the plastic
hanger can be threaded through the hole in the
center of the cover plate. The small end then
goes  into  one  of  the  slots  on  the  mounting
bracket.

❒

 Route the Light Control’s wires through the

large gasket holes.

Junction Box