Faber MR-16 Fascicule
Halogen Bulb replacement instructions:
If your halogen bulbs need replacement, please follow
these instructions below. You will need a 1” wide
suction cup, available thru Faber or local hardware store.
these instructions below. You will need a 1” wide
suction cup, available thru Faber or local hardware store.
Step 1: Purchase a new MR-11 or MR-16 (Pellicano),
12 volt, 20 watt halogen bulb with a glass lens cover.
12 volt, 20 watt halogen bulb with a glass lens cover.
Step 2: Using the suction cup gently push against the
bulb in the hood making a seal around the bulb.
bulb in the hood making a seal around the bulb.
Step 3: Pull down on the bulb with the suction cup, to
remove the bulb from the hood
remove the bulb from the hood
Step 4: Place the new bulb into the hood, lining up
the bulb prongs with the holes inside the hood.
the bulb prongs with the holes inside the hood.
For more information please call Faber at
508-358-5353 or email info@faberonline.com
508-358-5353 or email info@faberonline.com
Step 1
Step 2
Step 3
Step 4