Heath Zenith 52-4477-8 Manuel D’Utilisation

Tail Assembly

Coach Light

• Automatically comes on when motion is de-

tected.

• Automatically turns light off.

• Photocell keeps the light off during daylight

hours.

This package includes:

• Mounting screws and wire connectors

• The Light Control requires 120 volts AC.

• If you want to use Manual Mode, the control

must be wired through a switch.

• Some electrical codes require installation by 

Model 52-4477-8

Wire 

Path

Junction Box 

Screws

Fixture 

Screw

Remove ground screw and 2 fixture screws from

the mounting plate. Flip plate over. Reinsert

ground screw. Insert the 2 fixture screws in the

holes near the junction box screws holes. Wire

path must be located as shown above.

Ground 

Screw

Wire Path

Ground Screw

Mounting 

Plate

Fixture 

Screw

Decorative Nut

Mounting Screw

Bracket 

Mounting 

Screw

Mounting 

Plate

Junction 

Box

598-1285-00

We recommend having an assistant help hold

the lantern assembly during the wiring process.

For best performance, mount the fixture about 6

feet (1.8 m) above the ground.

1.  Remove two decorative nuts.

2.  Remove mounting plate.

3.  Tighten mounting screws finger tight.

4.  Attach mounting plate to junction box.