Harbor Freight Tools 94108 Manuel D’Utilisation

Page 2

SKU 94108 

 

 

For technical questions, please call 1-800-444-3353

Torque 

1,250 FT./LBS. 

Working Pressure  100 PSI, 115 PSI = maximum air pressure 

Air Consumption 

14 CFM Average 

Air Inlet 

1/2 inch – 14 NPT with screen 

Drive 

One inch, Inline air impact; 6” extended anvil 

Regulator on Unit  3 torque settings: 1, 2, & 3; Left and Right direction 

Overall Dimensions  22” (L) x 8 1/4” (W) x 6 1/2” (H) with side handle 

Weight 

25.8 LBS. 

You will need the manual for the safety warnings and precautions, assembly instructions, 

operating and maintenance procedures, parts list and diagram.  Keep your invoice with this 

manual.  Write the invoice number on the inside of the front cover.  Keep the manual and 

invoice in a safe and dry place for future reference.

reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. 

Keep work area clean.  Cluttered areas invite injuries.

2. 

Observe work area conditions.  Do not use machines or power tools in damp or wet 

locations.  Don’t expose to rain.  Keep work area well lighted.  Do not use electrically 

powered tools in the presence of flammable gases or liquids.

3. 

Keep children away.  Children must never be allowed in the work area.  Do not let 

them handle machines, tools, or extension cords.

4. 

Store idle equipment.  When not in use, tools must be stored in a dry location to 

inhibit rust.  Always lock up tools and keep out of reach of children.

5. 

Use the right tool for the job. Do not attempt to force a small tool or attachment to 

do the work of a larger industrial tool. There are certain applications for which this 

tool was designed. It will do the job better and more safely at the rate for which it was 

intended. Do not modify this tool and do not use this tool for a purpose for which it 

was not intended.

6. 

Dress properly.  Do not wear loose clothing or jewelry as they can be caught in 

moving parts.  Protective, electrically non-conductive clothes and non-skid footwear 

are recommended when working.  Wear restrictive hair covering to contain long hair.

7. 

Do not overreach.  Keep proper footing and balance at all times. Do not reach over 

or across running machines.

8. 

Use eye and ear protection.  Always wear ANSI approved impact safety goggles.