Chauvet DMX512 Manuel D’Utilisation
COLORdash
™ Par
User Manual
9
9/4/2008 12:09 PM
Mounting
Orientation
This fixture may be mounted in any safe position.
Rigging
The fixture includes a mounting yoke to which a rigging clamp can be attached. You
must supply your own clamp and make sure the clamp is capable of supporting the
weight of
must supply your own clamp and make sure the clamp is capable of supporting the
weight of
this fixture. You can order “C” and “O”-clamps from any CHAUVET dealer
or distributor (CLP-15, CLP-06 recommended).
Note: There are 2 types of applications for this fixture: floor stand for up lighting, and
overhead use for down lighting. If you are using this fixture for up lighting, then you must
use at least 1 safety cable/chain for each fixture in addition to the mounting brackets.
overhead use for down lighting. If you are using this fixture for up lighting, then you must
use at least 1 safety cable/chain for each fixture in addition to the mounting brackets.
If hanging the fixture for over head use, then please follow the below steps.
1. Block access below the work area and use suitable and stable platform
when installing or servicing fixture.
2. Safety cables must always be used, secured
through the heat sink
ventilation passageway
. The safety cable must be capable of holding 10
times the weight of the fixture.
3. Verify the structure can hold 10 times the weight of all to-be installed
fixtures.
Caution!
After prolonged periods of operation, the fixture chassis may reach high
temperatures. This fixture must be mounted in a ventilated location, as it uses
forced convection cooled.
Hanging Clamp
Note: sold separately
Hanging Bracket/
Floor Stand
Floor Stand
Barn Doors