Manualsbrain.com
  1. Manuels
  2. Marques
  3. Tascam
  4. DM-3200
  5. Manuel D’Utilisation

Tascam DM-3200 Manuel D’Utilisation

Télécharger
Page de 120
5 – Channel modules : Snapshots
80 
TASCAM DM-3200 
User’s Manual
Storing snapshots
Snapshots may be stored to any of the four banks on 
the CF card.
•
The cursor keys are used on the right side of 
the screen to select the bank in which the 
snapshot is stored, and the POD 4 encoder is 
used to select the destination. Alternatively, 
the direct 
LIBRARY
 keys may be used for this 
purpose.
Either press the POD 2 switch (
STORE AS
) or use the 
on-screen 
STORE 
button and 
ENTER
:
•
On the left side of the screen, use the wheel 
and 
ENTER
 key to edit the name of the snap-
shot. The name can be copied from an existing 
entry and pasted to a library entry.
•
POD 2 is used to alter the transition time 
(
Xtion
). This time can also be copied to and 
from library entries.
•
Finally, the POD 2 switch (
STORE
) is used to 
store the current settings to the selected slot 
(or POD 3 (
CANCEL
) is used to cancel the opera-
tion). If a snapshot already exists in the desti-
nation area, a popup message appears to 
confirm the overwriting operation.
Information about a snapshot
When the library screen is visible, pressing the POD 
4 switch brings up a popup information panel about 
the snapshot whose library entry is highlighted in the 
right-hand list.
The panel contains the following information:
• Name and transition time.
• Creation date and time (card bank data only).
• Project with which the snapshot is associated, 
together with the sampling frequency used (card 
bank data only).
Figure 5.37: Storing a snapshot