Hobart ML-130193 LXeR Manuel D’Utilisation

– 4 –

The LXe Series dishwashers are fully automatic, front-loading dishwashing machines. The LXe series 
machines are capable of doing 24 to 34 racks per hour, depending on model. 

All LXe Series dishwashers shut down automatically 4 hours after last use to conserve energy. 

All LXeH and LXeR dishwashers include Sense-A-Temp™ to insure proper hot water temperature  
during rinse.

Standard equipment includes two 20" x 20" racks, electronic controls, drain pump, rinse pump, chemical 
pumps, fill hose, and drain hose.

LXeC, LXePR 

Fresh water rinse; low-temperature, chemical-sanitizing models for use

 

with 6% sodium hypochlorite solution (bleach) as the sanitizing agent*. 
Note: If 8.40% bleach is to be used, contact Hobart Service or your 
chemical supplier to change the sanitizer pump settings. (Charges may 
apply)

LXeH 

Fresh water rinse with a built-in 70°F rise booster heater. This allows an 
incoming water temperature of 110°F. 

LXeR 

Fresh water rinse with an internal energy recovery unit and a built-in 70°F 
rise booster heater. Recommended incoming water temperature 55°F to 
80°F. 

* - Sanitizing agent must be used in accordance with the EPA-registered label use instructions.