3com 206380-A Manuel D’Utilisation
Installation and Reference for the BayStack 22 PC Card Adapter
2-2
206380-A
Installing the BayStack 22 PC Card Adapter
This section provides instructions for installing the BayStack 22 network card into
a laptop computer. Computers vary in design; therefore, instructions and
illustrations in this section may not exactly match your computer. However, the
procedures will be similar.
a laptop computer. Computers vary in design; therefore, instructions and
illustrations in this section may not exactly match your computer. However, the
procedures will be similar.
To install the BayStack 22 network card in a computer:
1.
Shut down the computer.
2.
Unplug the computer power cord from the power source.
3.
Depress both sides of the 15-slot connector of the media coupler.
4.
Connect the media coupler to the network card.
5.
Be sure the media coupler connector clicks securely into place.
6.
Insert the BayStack 22 network card into an empty CardBus PC Card
slot on the laptop. The BayStack 22 network card label must be facing up
(
slot on the laptop. The BayStack 22 network card label must be facing up
(
).
Figure 2-1.
BayStack 22 Network Card Installation
7.
Be sure the network card is firmly secured.
9477FA