Liebherr 7083 247-00 Manuel D’Utilisation

22

The appliance defrosts automatically. The water that forms on the 

rear wall drains into a reservoir at the back of the appliance and 

evaporates automatically through the compressor heat.

The lock in the appliance door is 

equipped with a safety mechanism. 
Locking the appliance:

•  Insert the key as shown by arrow 1.

•  Turn the key 90°.
To unlock the appliance, the same 

procedure must be repeated in the 

same order.

The grid shelves can be moved 

to accommodate different height

bottles or packages. 
The  ventilation  slots  of  the 

The interior light is fitted on the inside at the top. Switch on switch S, 

the interior light comes on.
Changing the tube: 

Pull out the mains plug or remove/

unscrew the fuse.
• Lever  out  the  cover  panel  ➀ on 

the lamp housing at the front and 

remove downwards. 

• Turn the tube ➁ 90° and pull out 

downwards. Insert a new tube and 

turn 90°. 

• Replace  the  cover  panel  ➀ by 

inserting at the back and clicking 

into place at the front.

If the interior light still does not work after you have changed the 

bulb, please consult your nearest customer service point.

The following indications can be set for the defrost phase.

•  Symbol 

 

+ alternating display of 

 and the current tem-

perature in the interior of the appliance. 

•  Symbol 

 

+ temperature before the start of the defrost phase 

(factory setting).

•  Symbol 

 

+ 

. 

Press 

for 5 seconds. Display =

Display =

Display =

Display =

Display =

Display =

Use buttons 

 and 

 to select the desired setting. 

= alternating display of 

 and the current temperature in the 

interior of the appliance.

   = temperature before the start of the defrost phase. 

= display of 

 only.

Display =

Press 

 for 5 seconds. 

The electronic control system will automatically switch back to 

normal operating mode.