Liebherr 7083 247-00 Manuel D’Utilisation

25

GB

1.

  Unscrew the hinge bracket.

Important: The door mounting has 

a spring mechanism enabling the 

door to close by itself. The hinge 

bracket turns to the left when the 

screws are undone.

2. 

Pull the door out at the bottom 

and lift off.

3.

  Transfer handle and plugs to the 

opposite side of the door.

  Transfer pin on hinge bracket to the 

opposite side.

  Transfer upper hinge components to 

the opposite side.

  Transfer cover plate to the opposite 

side.

  Mount door on hinge pin and close.

  Insert hinge bracket in lower door 

mounting.

  Turn hinge bracket by 90° - spring 

is compressed. Screw on hinge 

bracket.

A cross-section of min. 200 cm

2

 is re quired in the 

worktop for ventilation of the rear of the appliance. 

If no ventilation grille is provided in the worktop, the recess 

must be at least 860 mm high to ensure adequate heat 

dissipation to the front.

The appliance complies with the relevant safety regulations and 

EC Directives 2004/108/EC and 2006/95/EC.