Smeg PA106SX Manuel D’Utilisation

 

8

 

 

 

 

 

  Extract from AS5601 

 

   

 

  REQUIREMENTS 

 

 

 

1  Overhead clearances – (Measurement A) 

 

 

and exhaust fans shall be installed in accordance with the

manufacturer’s instructions. However, in no case shall the clearance between the
highest part of the 

of the cooking 

and a 

be less than 

600 mm or, for an overhead exhaust fan, 750 mm. 

 

 

Any other downward facing 

less than 600 mm above the 

highest part of the 

shall be protected for the full width and depth of the

cooking surface area in accordance with Clause 5.12.1.2. However, in no case
shall this clearance to any surface be less than 450 mm. 

 

2  Side clearances – (Measurements B & C) 
 

Where B, measured from the periphery of the nearest 

to any vertical 

e, is less than 200 mm, the surface shall be protected in 

accordance with Clause 5.12.1.2 to a height C of not less than 150 mm above 
the 

for the full dimension (width or depth) of the cooking surface area. Where

the cooking 

is fitted with a ‘splashback’, protection of the rear wall is

not required. 

 

3  Additional requirements for Freestanding and Elevated Cooking  

Appliaces  –

(Measurements D & E) 

 Where 

D, the distance from the periphery of the nearest 

to a horizontal 

is less than 200 mm, then E shall be 10 mm or more, or the 

horizontal surface shall be above the 

t.