Smeg SE2732ID Manuel D’Utilisation

Instructions for assembly

Start of operation

Once the hob has been installed and the power supply has been
provided (mains connected) an automatic test of the controls will
be carried out and information for customer service will be
indicated.
This indication will go off after 30 seconds or as soon as a key
has been pressed.
Briefly wipe over the surface of the hob with a sponge and soapy
water and then dry with a clean cloth.

Technical data

Electrical connection

• The electrical connection must be carried out by a quali-

fied electrician who is authorised to carry out such work!

• Statutory regulations and the connection specifications issued

by the local power supply company must be strictly observed.

• When connecting the appliance it must be ensured that there

is a device which makes it possible to disconnect it from the
mains at all poles with a contact opening width of at least
3mm. Line-protecting switches, fuses or contactors are sui-
table cut-out devices.

• When connecting and repairing the appliance disconnect it

from the electricity supply with one of these devices.

• Ensure that all live connections are safely insulated when

installing the oven.

• The earth wire must be so long that if the strain relief fails, the

live wires of the connecting cable are subjected to tension
before the earth wire.

• Any superfluous cable must be removed from the installation

area beneath the appliance.

• The induction hob has been fitted with a temperature-resistant

connection cable in the factory.

• Connection to the mains is carried out in accordance with the

circuit diagram, unless the connection cable is already fitted
with a plug.

• If damaged, the manufacturer or his customer service must

replace the connection cable installed with a special connec-
tion cable.

Attention!
Incorrect connection may result in the power electronics unit
being destroyed.

Dimensions
Hob Height/ Width/ Depth

Installation dimensions
Width/ Depth

52 x 580; 600; 700 x 510

560 x 490

Cooking zones
Back left

Ø cm / kW

Front left

Ø cm / kW

Front right

Ø cm / kW

Back rights

Ø cm / kW

Minimal diameter of the saucepan

bottom to activate the

cooking zones)

Ø cm

18/max. 2.8
18/max. 2.8
16/max. 2.0
21/max. 3.1

Electrical connection
Mains voltage
Component rated voltage
Hob, total

400-415V 2N~, 50-60 Hz
230 -240V
5.9

Dimensions
Hob Height/ Width/ Depth

Installation dimensions
Width/ Depth

52 x 770; 800 x 510

560 x 490

Cooking zones
Back left

Ø cm / kW

Front left

Ø cm / kW

Front right

Ø cm / kW

Back rights

Ø cm / kW

Minimal diameter of the saucepan

bottom to activate the

cooking zones)

Ø cm

18/max. 2.8
18/max. 2.8
16/max. 2.0
21/max. 3.1

Electrical connection
Mains voltage
Component rated voltage
Hob, total

400-415V 2N~, 50-60 Hz
230 -240V
5.9

Dimensions
Hob Height/ Width/ Depth

Installation dimensions
Width/ Depth

52 x 580; 600; 700 x 510

560 x 490

Cooking zones
Back left

Ø cm / kW

Front left

Ø cm / kW

Right

Ø cm / kW

Minimal diameter of the saucepan

bottom to activate the

cooking zones)

Ø cm

16/max. 2.0
21/max. 3.1
29/max. 2.8

Electrical connection
Mains voltage
Component rated voltage
Hob, total

400-415V 2N~, 50-60 Hz
230 -240V
5.9

en/y

ell

en/y

low

ite

own

gree

n/ye

llo

gree

n/ye

llo

blue

ite

bro

blac

llo

green

/ye

llo

ite

llo

ite

brow