Fisher & Paykel OR60 Manuel D’Utilisation

12

Check whether the flame spreads to all burner ports when the burner is lit with the gas tap set to 
the minimum position. If some ports do not light, increase the minimum gas rate setting. 
Check whether the burner remains lit even when the gas tap is turned quickly from the 
maximum to the minimum position. If the burner does not remain lit, increase the minimum gas 
rate setting.
The procedure for adjusting the minimum gas rate setting is described below. 

 Turn on the burner 

 Turn the tap to the MINIMUM position 

 Take off the knob 

 With a small flat screwdriver turn the screw to the correct regulation.

Note: for LPG gas, the regulation screw is normally tightened up.

Test Point Pressure [kPa]

1.0

2.75

BURNER

Injector

Orifice Dia.

[mm]

Gas 

Consumption

[MJ/h]

Injector

Orifice Dia.

[mm]

Gas 

Consumption

[MJ/h]

Auxiliary

0.85

3.60

0.53

3.60

Semi-rapid

1.12

6.30

0.70

6.30

Wok

1.65

13.30

0.95

11.90