Saeco Coffee Makers Odea Giro Manuel D’Utilisation

DESCALING

When performing a descaling cycle, it is necessary to be present during the entire process

(about 40 minutes).

Caution! Do not use vinegar as a descaler.

The descaling must be done when indicated by the machine. Use a non-toxic, non-harmful descaling

solution. Saeco descaling solution is recommended.

The used solution should be disposed according to the manufacturer instructions and/or regulations in the

country of use.

Note: before starting a descaling cycle make sure that:

1 a container of adequate size is available;

2 if the “Aqua Prima” ﬁ lter is used, make sure that it has been removed.

When the descaling light is

ﬂ ashing, a descaling cycle must

be performed.

Place a large container beneath

the steam spout.

Empty the tank and reﬁ ll it,

dissolving the descaling solution

in a full tank of water.

Press the hot water button.

Turn the knob until the

position is reached. Dispense

the descaling solution into the

container for 15 seconds.

Turn the knob until it is in the

rest position ( ).