Hamilton Beach Can Openers Manuel D’Utilisation

1. Place cutting edge of knife in the

knife slot located on the back of
the can opener. 

2. Draw the knife blade through the

slot several times.

NOTE: Serrated blades should never
be inserted into this unit.

• The can opener will easily open all standard size cans.

• On some models it will be necessary to position can opener

at edge of counter, allowing for clearance to open cans
taller than the can opener.

• If there is a bump, dent, or heavy seam in the rim of the

can, open the other end of the can or start cutter just
beyond the problem area.

• The motor of your can opener is permanently lubricated

and will require no oiling.

• To use the cord storage on the back of the opener, push in

or pull out the cord as needed.

1. Unplug cord from electrical outlet.

2. To remove the piercing lever, push

lever up and pull out.

3. Wash the piercing lever in hot,

soapy water. Rinse and dry 
thoroughly. Do not place in 
dishwasher.

4. Wipe the body of can opener 

with damp cloth. NEVER im-
merse the can opener in water.

5. To assemble, place the knob 

on the back of piercing lever 
into keyhole with the lever pointing
toward the ceiling. Rotate the lever
clockwise until it locks into place.

If you have a question about your can opener, call our 
toll-free customer service number. Before calling, please 
note the model, type, and series numbers and fill in that 
information below. These numbers can be found on the 
bottom of your can opener. This information will help us
answer your question much more quickly.

840097800 ENv01.qxd  2/28/02  10:37 AM  Page 6