Ryobi CTH1202K2 Manuel D’Utilisation
Page 6
SPECIFICATIONS:
DRILL-DRIVER
CTH1202K2
CTH1442K2
CTH1802
Chuck
3/8 in. Keyless
3/8 in. Keyless
1/2 in. Keyless
Motor
DC Motor 12.0 V
DC Motor 14.4 V
DC Motor 18.0 V
Gear Train
Two-Speed
Two-Speed
Two-Speed
Switch
Variable Speed
Variable Speed
Variable Speed
No Load Speed
0-300 RPM (Low)
0-350 RPM (Low)
0-350 RPM (Low)
0-1000 RPM (High)
0-1300 RPM (High)
0-1300 RPM (High)
Clutch
24 Positions
24 Positions
24 Positions
CHARGER
1400666
1400656
1400667
Input
120 V, 60 Hz, AC only
120 V, 60 Hz, AC only 120 V, 60 Hz, AC only
Charging Voltage 12.0 V
14.4 V
18.0 V
Charge Rate
1 Hour
1 Hour
1 Hour
IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES
When using your drill-driver continuously, the batteries in
your battery pack become hot. You should let a hot battery
pack cool down for approximately 30 minutes before at-
tempting to recharge.
your battery pack become hot. You should let a hot battery
pack cool down for approximately 30 minutes before at-
tempting to recharge.
Note: This situation occurs when continuous use of your
drill-driver causes the batteries to become hot. It does not
drill-driver causes the batteries to become hot. It does not
occur under normal circumstances. Refer to "Charging
Your Drill-Driver" for normal recharging of batteries. If the
charger does not charge your battery pack under normal
circumstances, return both the battery pack and charger to
your nearest RYOBI AUTHORIZED SERVICE CENTER for
electrical check.
Your Drill-Driver" for normal recharging of batteries. If the
charger does not charge your battery pack under normal
circumstances, return both the battery pack and charger to
your nearest RYOBI AUTHORIZED SERVICE CENTER for
electrical check.
DISPOSAL OF THE EXHAUSTED BATTERY
To preserve natural resources, please
recycle or dispose of batteries properly.
recycle or dispose of batteries properly.
This product contains nickel-cadmium
battery. Local, state, or federal laws may
prohibit disposal of Nickel-Cadmium
batteries in ordinary trash.
battery. Local, state, or federal laws may
prohibit disposal of Nickel-Cadmium
batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
available recycling and/or disposal options.
For more information on battery recycling call 1-800-8
BATTERY.
BATTERY.
BATTERY PACK PREPARATION FOR
RECYCLING
RECYCLING
WARNING:
Upon removal, cover the battery pack's terminals with
heavy duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its
components. Also, never touch both terminals with metal
objects and/or body parts, as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
heavy duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its
components. Also, never touch both terminals with metal
objects and/or body parts, as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
WARNING:
Do not attempt to disassemble the battery pack. Fire or injury may result.
RE
CYCLE
1
.8
00.822.88
37
R B R C
N i C d
The operation of any power tool can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields.
eyes, which can result in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields.
WARNING: